dmesg - 16384 MB 2133MHz Samsung
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-36-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #63-Ubuntu SMP Wed Sep 3 21:30:07 UTC 2014 (Ubuntu 3.13.0-36.63-generic 3.13.11.6)
Command line: initrd=/images/RackBench_OCP_3.1/initrd.gz ksdevice=bootif lang= locale=en_US text netboot=nfs boot=casper priority=critical init=/sbin/init nfsroot=10.127.88.7:/var/www/cobbler/ks_mirror/RackBench_OCP_3_1-x86_64 hostname=Cl7100-8 domain=local.lan suite=generic26 BOOT_IMAGE=/images/RackBench_OCP_3.1/vmlinuz BOOTIF=01-90-e2-ba-a1-28-60
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000078b95fff] usable
BIOS-e820: [mem 0x0000000078b96000-0x0000000079144fff] reserved
BIOS-e820: [mem 0x0000000079145000-0x0000000079194fff] ACPI data
BIOS-e820: [mem 0x0000000079195000-0x000000007a0f8fff] ACPI NVS
BIOS-e820: [mem 0x000000007a0f9000-0x000000007bd5cfff] reserved
BIOS-e820: [mem 0x000000007bd5d000-0x000000007bd5dfff] usable
BIOS-e820: [mem 0x000000007bd5e000-0x000000007bde3fff] reserved
BIOS-e820: [mem 0x000000007bde4000-0x000000007bffffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: FOXCONN RAX/RAX, BIOS HRP0004F 05/29/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 030000000000 mask 3FC000000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [ffff8800000fd880]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x87fe00000-0x87fffffff]
[mem 0x87fe00000-0x87fffffff] page 1G
init_memory_mapping: [mem 0x87c000000-0x87fdfffff]
[mem 0x87c000000-0x87fdfffff] page 1G
init_memory_mapping: [mem 0x800000000-0x87bffffff]
[mem 0x800000000-0x87bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x78b95fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x789fffff] page 2M
[mem 0x78a00000-0x78b95fff] page 4k
init_memory_mapping: [mem 0x7bd5d000-0x7bd5dfff]
[mem 0x7bd5d000-0x7bd5dfff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x7bde4000-0x7bffffff]
[mem 0x7bde4000-0x7bdfffff] page 4k
[mem 0x7be00000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x77326000-0x78b74fff]
ACPI: RSDP 00000000000f0530 000024 (v02 ALASKA)
ACPI: XSDT 00000000791550a0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000791826c8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000791551f8 02D4CB (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 000000007a0f6f80 000040
ACPI: APIC 00000000791827d8 000100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000791828d8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0000000079182920 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SPMI 00000000791829c0 000040 (v05 ALASKA A M I 00000000 AMI. 00000000)
ACPI: MCFG 0000000079182a00 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 0000000079182a40 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BDAT 0000000079182a88 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0000000079182ab8 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0000000079182af0 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 0000000079182b80 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0000000079182be8 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0000000079182c18 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0000000079183a70 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0000000079183ab0 00ED2F (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: SPCR 00000000791927e0 000050 (v01 A M I APTIO V 01072009 AMI. 00000005)
ACPI: SSDT 0000000079192830 00211D (v02 ALASKA SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0000000079194950 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 00000000791949b8 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: DMAR 0000000079194ac0 0000BC (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff]
Initmem setup node 0 [mem 0x00000000-0x87fffffff]
NODE_DATA [mem 0x87fff8000-0x87fffcfff]
[ffffea0000000000-ffffea0021ffffff] PMD -> [ffff88085f600000-ffff88087f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x87fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00099fff]
node 0: [mem 0x00100000-0x78b95fff]
node 0: [mem 0x7bd5d000-0x7bd5dfff]
node 0: [mem 0x7bde4000-0x7bffffff]
node 0: [mem 0x100000000-0x87fffffff]
On node 0 totalpages: 8359244
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 7671 pages used for memmap
DMA32 zone: 490931 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x78b96000-0x79144fff]
PM: Registered nosave memory: [mem 0x79145000-0x79194fff]
PM: Registered nosave memory: [mem 0x79195000-0x7a0f8fff]
PM: Registered nosave memory: [mem 0x7a0f9000-0x7bd5cfff]
PM: Registered nosave memory: [mem 0x7bd5e000-0x7bde3fff]
PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88087fc00000 s86336 r8192 d24256 u131072
pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8228608
Policy zone: Normal
Kernel command line: initrd=/images/RackBench_OCP_3.1/initrd.gz ksdevice=bootif lang= locale=en_US text netboot=nfs boot=casper priority=critical init=/sbin/init nfsroot=10.127.88.7:/var/www/cobbler/ks_mirror/RackBench_OCP_3_1-x86_64 hostname=Cl7100-8 domain=local.lan suite=generic26 BOOT_IMAGE=/images/RackBench_OCP_3.1/vmlinuz BOOTIF=01-90-e2-ba-a1-28-60
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32803700K/33436976K available (7373K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 633276K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-11.
NR_IRQS:16640 nr_irqs:1184 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.173 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.34 BogoMIPS (lpj=9576692)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28537 entries in 112 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x0000007bca3000 end: 0x0000007bcb1fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0
IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (57460.15 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x79195000-0x7a0f8fff] (16138240 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 13:10:18, date: 01/28/00
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD (null) 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: reg 0x10: [mem 0x00000010-0x0000001f pref]
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbd18000-0xfbd18fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbd00000-0xfbd0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbd17000-0xfbd1700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfbd16000-0xfbd1600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbd14000-0xfbd143ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:8d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbd13000-0xfbd133ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037]
pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbd12000-0xfbd127ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbd11000-0xfbd110ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:10fb] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfba00000-0xfbafffff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xe020-0xe03f]
pci 0000:03:00.0: reg 0x20: [mem 0xfbc04000-0xfbc07fff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xfbb80000-0xfbbfffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: [8086:10fb] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xfb900000-0xfb9fffff 64bit]
pci 0000:03:00.1: reg 0x18: [io 0xe000-0xe01f]
pci 0000:03:00.1: reg 0x20: [mem 0xfbc00000-0xfbc03fff 64bit]
pci 0000:03:00.1: reg 0x30: [mem 0xfbb00000-0xfbb7ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfb900000-0xfbcfffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 05-06]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfb000000-0xfb8fffff]
pci 0000:06:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xfb000000-0xfb7fffff]
pci 0000:06:00.0: reg 0x14: [mem 0xfb800000-0xfb81ffff]
pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xfb000000-0xfb8fffff]
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: \_SB_.UNC0: notify handler is installed
ACPI: \_SB_.PCI0: notify handler is installed
Found 2 acpi root devices
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:ff:1e.3: no compatible bridge window for [mem 0x00000010-0x0000001f pref]
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0x78b96000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bd5e000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0400-0x047f] could not be reserved
system 00:06: [io 0x0580-0x059f] has been reserved
system 00:06: [io 0x0600-0x061f] has been reserved
system 00:06: [io 0x0880-0x0883] has been reserved
system 00:06: [io 0x0800-0x081f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:06: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:06: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0a00-0x0a0f] has been reserved
system 00:07: [io 0x0a10-0x0a1f] has been reserved
system 00:07: [io 0x0a20-0x0a2f] has been reserved
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: [io 0x0a40-0x0a4f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: Plug and Play ACPI device, IDs IPI0001 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:ff:1e.3: BAR 0: can't assign mem pref (size 0x10)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [mem 0x00000010-0x0000001f pref]
pci 0000:ff:1e.3: BAR 0: [mem 0x00000010-0x0000001f pref] conflicts with reserved [mem 0x00000000-0x00000fff]
pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: max bus depth: 2 pci_try_num: 3
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:00:03.0: BAR 15: assigned [mem 0x90000000-0x903fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: BAR 7: assigned [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: BAR 10: assigned [mem 0x90100000-0x901fffff 64bit pref]
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: BAR 7: assigned [mem 0x90200000-0x902fffff 64bit pref]
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: BAR 10: assigned [mem 0x90300000-0x903fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfb900000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0x90000000-0x903fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xfb000000-0xfb8fffff]
pci 0000:00:1c.5: PCI bridge to [bus 05-06]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfb000000-0xfb8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfbcfffff]
pci_bus 0000:03: resource 2 [mem 0x90000000-0x903fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfb000000-0xfb8fffff]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfb000000-0xfb8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24892K (ffff880077326000 - ffff880078b75000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x73326000-0x77326000] (64MB) mapped at [ffff880073326000-ffff880077325fff]
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x23
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x23
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(949065018.784:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: irq 67 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 68 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 69 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbd14000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-36-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbd13000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-36-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-36-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-36-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 2394.257 MHz
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 38f3b6c63a85affdfbbe0e53339df8e0c6b6c9d5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 4:74:181
acpi device:40: hash matches
rtc_cmos 00:02: setting system clock to 2000-01-28 13:10:20 UTC (949065020)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[177]: starting version 204
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
dca service started, version 1.12.1
ahci 0000:00:1f.2: irq 70 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[drm] Initialized drm 1.1.0 20060810
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
ixgbe: Copyright (c) 1999-2013 Intel Corporation.
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbd12000 port 0xfbd12100 irq 70
ata2: SATA max UDMA/133 abar m2048@0xfbd12000 port 0xfbd12180 irq 70
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
[drm] AST 2300 detected
[drm] dram 1632000000 1 16 00800000
[TTM] Zone kernel: Available graphics memory: 16415730 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
ast 0000:06:00.0: fb0: astdrmfb frame buffer device
ast 0000:06:00.0: registered panic notifier
[drm] Initialized ast 0.1.0 20120228 for 0000:06:00.0 on minor 0
usb 1-1: new high-speed USB device number 2 using ehci-pci
ixgbe 0000:03:00.0: irq 71 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 72 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 73 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 74 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 75 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 76 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 77 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 78 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 79 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 80 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 81 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 82 for MSI/MSI-X
ixgbe 0000:03:00.0: irq 83 for MSI/MSI-X
ixgbe 0000:03:00.0: Multiqueue Enabled: Rx Queue count = 12, Tx Queue count = 12
ixgbe 0000:03:00.0: PCI Express bandwidth of 32GT/s available
ixgbe 0000:03:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:03:00.0: MAC: 2, PHY: 9, SFP+: 3, PBA No: H31656-003
ixgbe 0000:03:00.0: 90:e2:ba:a1:28:60
ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Micron_M500DC_MTFDDAK800MBB, 0144, max UDMA/133
ata1.00: 1562824368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Micron_M500DC_MTFDDAK800MBB, 0144, max UDMA/133
ata2.00: 1562824368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Micron_M500DC_MT 0144 PQ: 0 ANSI: 5
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1562824368 512-byte logical blocks: (800 GB/745 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA Micron_M500DC_MT 0144 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1562824368 512-byte logical blocks: (800 GB/745 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-13: new high-speed USB device number 2 using xhci_hcd
usb 3-13: New USB device found, idVendor=0624, idProduct=0248
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-13: Product: Gadget USB HUB
usb 3-13: Manufacturer: no manufacturer
usb 3-13: SerialNumber: 0123456789
hub 3-13:1.0: USB hub found
hub 3-13:1.0: 5 ports detected
Switched to clocksource tsc
usb 3-13.1: new high-speed USB device number 3 using xhci_hcd
usb 3-13.1: New USB device found, idVendor=0624, idProduct=0249
usb 3-13.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 3-13.1: Product: Keyboard/Mouse Function
usb 3-13.1: Manufacturer: Avocent
usb 3-13.1: SerialNumber: 20121018
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.0/input/input2
hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-13.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.1/input/input3
hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-13.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.2/input/input4
hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-13.1/input2
ixgbe 0000:03:00.1: irq 84 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 85 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 86 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 87 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 88 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 89 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 90 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 91 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 92 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 93 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 94 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 95 for MSI/MSI-X
ixgbe 0000:03:00.1: irq 96 for MSI/MSI-X
ixgbe 0000:03:00.1: Multiqueue Enabled: Rx Queue count = 12, Tx Queue count = 12
ixgbe 0000:03:00.1: PCI Express bandwidth of 32GT/s available
ixgbe 0000:03:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:03:00.1: MAC: 2, PHY: 1, PBA No: H31656-003
ixgbe 0000:03:00.1: 90:e2:ba:a1:28:61
ixgbe 0000:03:00.1: Intel(R) 10 Gigabit Network Connection
VMware vmxnet3 virtual NIC driver - version 1.2.0.0-k-NAPI
VMware PVSCSI driver - version 1.0.2.0-k
Adaptec aacraid driver 1.2-0[30200]-ms
ixgbe 0000:03:00.0: registered PHC device on eth0
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ixgbe 0000:03:00.0 eth0: detected SFP+: 3
ixgbe 0000:03:00.0 eth0: NIC Link is Up 10 Gbps, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
squashfs: version 4.0 (2009/01/31) Phillip Lougher
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[937]: starting version 204
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
lp: driver loaded but no devices found
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
mei_me 0000:00:16.0: initialization failed.
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:09: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIV 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
device-mapper: multipath: version 1.6.0 loaded
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
ipmi_si 00:09: Found new BMC (man_id: 0x00168b, prod_id: 0x0000, dev_id: 0x20)
ipmi_si 00:09: IPMI kcs interface initialized
ixgbe 0000:03:00.1: registered PHC device on eth1
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
init: failsafe main process (1176) killed by TERM signal
ipmi device interface
init: ttyS4 main process (1922) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1925) terminated with status 1
init: ttyS1 main process ended, respawning
init: ttyS4 main process (1944) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1945) terminated with status 1
init: ttyS1 main process ended, respawning
init: ttyS4 main process (1948) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1949) terminated with status 1
init: ttyS1 main process ended, respawning
init: ttyS4 main process (1953) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1954) terminated with status 1
init: ttyS1 main process ended, respawning
init: ttyS4 main process (1957) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1958) terminated with status 1
init: ttyS1 main process ended, respawning
init: ttyS4 main process (1962) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1964) terminated with status 1
init: ttyS1 main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
init: ttyS4 main process (1968) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1969) terminated with status 1
init: ttyS1 main process ended, respawning
init: ttyS4 main process (1973) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1974) terminated with status 1
init: ttyS1 main process ended, respawning
init: ttyS4 main process (1980) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1981) terminated with status 1
init: ttyS1 main process ended, respawning
init: ttyS4 main process (1985) terminated with status 1
init: ttyS4 main process ended, respawning
init: ttyS1 main process (1986) terminated with status 1
init: ttyS1 main process ended, respawning
init: ttyS4 main process (1989) terminated with status 1
init: ttyS4 respawning too fast, stopped
init: ttyS1 main process (1990) terminated with status 1
init: ttyS1 respawning too fast, stopped
perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000